Experience powerful cleaning with Interflon’s F-Active Technology—available in select high-performance cleaners
Skip image gallery
NSF H1
Interflon Metal Clean F (aerosol)
Powerful food grade cleaner and degreaser with pressure spray
$18.85
- Biodegradable NSF H1 degreaser
- High power versatile degreaser
- Fast evaporation without residue
- Spray with powerful jet
- Degreaser for hard surfaces
Product number:
9794
|
Product unit:
aerosol
Documents
Product information "Metal Clean F (aerosol)"
- Industrial Grade Metal Cleaner and Degreaser
- Removes Oil, Grease and Other Contaminants
- Cleans, Degreases and Evaporates Rapidly
- Does Not Contain Chlorinated Solvents
- Leaves No Residue Behind
- Powerful Jet for Parts Which Are Difficult to Reach
- Aerosol Can Be Used in Every Position
- NSF H1 Food Grade
Multi-Purpose Cleaner and Degreaser with NSF H1 approval for use in the food processing industry. Removes oil, grease, etc. from surfaces. Evaporates rapidly without leaving residues and has penetrating and temporary lubricating properties. Biodegradable and manufactured from renewable resources. When applied in and around a food processing area, the amount used should be the minimum to accomplish the technical effect on machine parts or equipment treated. Listed by the NSF for use in the food industry as a cleaner and degreaser.
Application areas
For cleaning and degreasing, also while processing food stuff or pharmaceuticals, of bearings, gear wheels, locks, cylinders, chains, sliding, hinges, axles, spindles, conveyor belts, brake systems etc. Also particularly suitable for cleaning asbestos-free brake pads. Do not use for cleaning rubber, plastic components or safety glass.Instructions for use
Spray liberally onto parts. Allow to penetrate and wipe with a clean cloth or paper. With severe soiling, repeat if necessary. For use in the food industry, also while processing food stuff or pharmaceuticals. After using, all surfaces must be washed with a detergent solution and rinsed with potable water. It is advisable to test a small inconspicuous area to make sure that the cleaning agent does not adversely affect or damage the surface being cleaned. Do not apply to hot surfaces. When cleaning large vertical areas, apply the product from the bottom and work upwards ensuring that the whole area is covered. Cleaning away any dirt is best done from the top in a downwards direction to prevent leaving any streak marks. Do not use the product or allow to dry in direct sunlight. Note: Interflon Metal Clean F (aerosol) is a very strong cleaner which can affect elastomers and rubbers.Specifications
| Micpol Technology: | No |
|---|---|
| Max operating temperature (C): | 40 |
| Food Safe (NSF): | H1 |
| Biodegradability: | 92 |
| Biodegradability norm: | OECD 301F |
| Halal: | Yes |
| Kosher: | Yes |
| Shelf_life (years): | 6 |
| NSF PFAS free: | Yes |
| Suitable for lubrication method: | manual |
| Suitable for: | Protecting 'Other', handtools & workshop equipment, mechanical machine parts |
| Colour: | Colourless |
| Density at 20°C (g/cm3): | 0,76 |
| NSF registration number: | 156455 |
| Odour: | Characteristic |
Safety & Compliance
What is F-Active® technology
Interflon F-Active represents a breakthrough in industrial cleaning. It’s not just a cleaner—it’s an activation technology designed to maximize efficiency and minimize downtime.
The F-Active formula penetrates deep to aggressively lift and suspend heavy contaminants—including stubborn grease, oil, carbon, and brake dust—allowing them to be easily removed. Crucially, the non-corrosive solvents are engineered to evaporate completely and quickly, leaving behind zero residue. This means you eliminate the need for time-consuming rinsing or wiping, and your surfaces are perfectly conditioned for immediate lubrication or continued operation.
Choose an F-Active product for a clean you can trust, especially in sensitive areas where compliance is critical.
- Biological action that uses active enzymes to break down organic matter
- Powerful degreasing agents that are highly effective against oils, greases, waxes and resins
- Many F-Active products are label free, biodegradable, and residue free
- A number of products are NSF certified for use in food and pharmaceutical environments
Skip product gallery
Frequently bought with
MicPol
Fin Super (aerosol)
- Very versatile dry-film spray
- High penetrating, long lasting film
- Reduction of friction and wear
- Highly durable non-staining film
- Resists water wash off and corrosion
MicPol
Lube TF (aerosol)
- Very versatile dry-film spray
- High penetrating, long lasting film
- Does not attract dirt and dust
- Eliminates wear; no stick slip
- Water resistant; displaces moisture
Degreaser EM30+ (aerosol)
- NSF K1/K3 degreaser
- For heavy oil and grease deposits
- Long effectiveness; slow evaporation
- Highly versatile cold degreaser
- Leaves no residue after use
NSF A1
Power Wipes
- NSF A1 Skinfriendly cleaning towels
- Versatile heavy-duty cleaning towel
- Removes wide range of contaminants
- Grime, grease/oil, ink, paint, glue
- Highly-absorbent; powerful cleaning
What is Interflon Metal Clean F (Aerosol) used for?
Metal Clean F (aerosol) is a multi-purpose cleaner and degreaser primarily used for cleaning and degreasing in the food processing and pharmaceutical industries. It can be used on bearings, gear wheels, locks, cylinders, chains, sliding mechanisms, hinges, axles, spindles, conveyor belts, brake systems (especially suitable for cleaning asbestos-free brake pads).
How do I apply Interflon Metal Clean F (Aerosol)?
- Spray Liberally: Spray liberally onto the parts to be cleaned.
- Allow to Penetrate: Allow the product to penetrate the soiled areas.
- Wipe Clean: Wipe with a clean cloth or paper.
- Repeat if Necessary: For severe soiling, repeat the process.
- Food Industry Specific: When used in food processing areas, surfaces must be washed with a detergent solution and rinsed with potable water after use.
What are the advantages of using Interflon Metal Clean F (Aerosol)?
- Effective Cleaning: Removes oil, grease, and other contaminants.
- Rapid Evaporation: Cleans, degreases, and evaporates quickly without leaving residues.
- Non-Chlorinated: Does not contain chlorinated solvents.
- Powerful Jet: Features a powerful spray jet for reaching difficult-to-access parts.
- Biodegradable: Biodegradable and manufactured from renewable resources.
- Temporary Lubrication: Has penetrating and temporary lubricating properties.
Are there any precautions or specific usage notes for Interflon Metal Clean F (Aerosol)?
- Test First: It is advisable to test a small, inconspicuous area to ensure the cleaning agent does not adversely affect or damage the surface being cleaned.
- Avoid Hot Surfaces: Do not apply to hot surfaces.
- Avoid Direct Sunlight: Do not use the product or allow it to dry in direct sunlight.
- Vertical Cleaning: When cleaning large vertical areas, apply the product from the bottom and work upwards. Clean away dirt from top to bottom to prevent streak marks.
- Material Compatibility: It is a very strong cleaner and can affect elastomers and rubbers. Do not use for cleaning rubber, plastic components, or safety glass.