Skip to main content Skip to search Skip to main navigation
Trusted by 100,000+ companies worldwide
Local expertise and support
PFAS-free lubrication

Product information "Lube EP+"

  • Extreme Pressure Oil Lubricant
  • Long Lasting Lubrication
  • Less Wear at High Loads
  • Highly Penetrating Oil
  •  Good Corrosion Protection
  •  No Stick Slip
  •  Less Dirt Adhesion
  •  Water Resistant
  • PFAS Free

 

Highly penetrating lubrication oil with MicPol® Technology for long lasting lubrication suitable for high loads. Chains lubricated with Interflon Lube EP+ continue to work smoothly even after the lubricating layer on the outside has completely disappeared. When lubricating the chains regularly with Interflon Lube EP+, the durability of the chains can be increased up to 5 times.

Application areas

For the lubrication and protection of heavily loaded chains and guides, for example conveyor belts, heavy trucks, industrial installations like lift chains, ground chains, etc. For the lubrication and protection of wire ropes, hinges, spindles, guides and all other applications under extreme pressure.

Instructions for use

Shake or stir before use according to the size of the packaging. Parts should be cleaned first with a solvent or alkaline cleaning agent. Spray Interflon Lube EP+ onto parts and allow to penetrate. Note: Do not use too much Interflon Lube EP+. A thin layer, with occasional re-application now and again, works better than a thick layer. Remove surplus Interflon Lube EP+ with a clean cloth. When applied in an automatic lubrication system, an agitation system is required. Please consult your technical advisor for more specific details.

Specifications

Micpol Technology: Yes
Kinematic viscosity at 40°C (cSt): 120
Kinematic viscosity at 40°C norm: ASTM D445
Max operating temperature (°C): 180
Min operating temperature (°C): -20
Shelf life (years): 4
PFAS-free: Yes
Suitable for lubrication method: manual, system
Dry Lubricant: Yes
Dielectric strength (KV/cm): 29
Suitable for: bearing, chains, wire ropes
Colour: Brown
Conductivity: >2000 pS/m
Conductivity norm: ASTM D2624
Density at 20°C (g/cm3): 0.89
Dielectric strength norm: IEC 60156
Odour: Like oil

Safety & Compliance

Dielectric strength norm IEC 60156

What is MicPol® technology?

MicPol® technology is Interflon's proprietary lubrication technology, specifically developed to reduce friction between moving parts to the lowest possible level. 

Based on micronisation and polarisation, MicPol® technology uses ultra-fine additives that reach microscopic surface irregularities and adhere strongly to metal. Through alignment, netting and anchoring, these additives form a smooth, resilient tribofilm that provides long-lasting protection. 

Key benefits of MicPol® technology: 

  • Consistently low friction across a wide range of speeds and load conditions
  • Extended lubrication intervals and reduced lubricant consumption
  • Reliable wear protection and longer component service life
  • Enhanced protection against water, dust, dirt and corrosion
  • Free from PFAS, PTFE, microplastics, silicones, nanomaterials and SVHCs

All our products are based on our exclusive MicPol® technology