Interflon Grease HD2
Heavy duty grease and anti corrosion agent in one
$47.83
- Extreme heavy duty grease
- Extreme load & shockload protection
- High adhesion & water resistance
- Long lasting corrosion protection
- High upper working temperature
Documents
Product information "Grease HD2"
- Adhesive Heavy-Duty Grease
- Extreme High-Pressure Applications
- Excellent Water-Resistant, Sealing and Corrosion-Resistant Properties
- Longer Lubrication Intervals and Economical in Use
- Solvent-Free and Anti-Corrosive
- Excellent Adhesive Properties
- Emergency Running Characteristics
- PFAS Free
Adhesive, heavy-duty grease with MicPol®. Suitable for extreme high-pressure applications, dusty and wet environments and increased temperatures. Perfect as a solvent-free anti-corrosion agent. A grease that can be used for almost all applications. Perfect for bearings, pin and bush joints, cables, chains, open transmissions, gear racks, spindles and many other applications where high pressure, (salt) water, dust, moisture and temperatures are factors.
Application areas
Suitable for the lubrication in heavy industry, including bridges and locks, transport industry, road construction, bearings with small tolerances, pin and bush connections, extensible sections of cranes, open gears and bearings which come in contact with (salt) water regularly, etc.
Instructions for use
For best results, parts should be cleaned or purged of the previous lubricant prior to use.
Specifications
| Micpol Technology: | Yes |
|---|---|
| Base(oil) viscosity (40°C): | 200 |
| Thickener: | Calcium sulfonate |
| Base oil viscosity at 40°C norm: | ASTM D445 |
| Dynamic viscosity at 20°C (mPas): | 0.75 |
| Dynamic viscosity at 20°C norm: | ASTM D2983 |
| NLGI grade (consistency): | 2 |
| NLGI grade norm: | ASTM D217 |
| Max operating temperature (°C): | 160 |
| Min operating temperature (°C): | -25 |
| Shelf life (years): | 4 |
| Suitable for lubrication method: | manual, system |
| Dn-factor: | 500000 |
| 4-ball weld load: | 7500 N |
| Corrosion resistance: | Excellent (Emcor distilled 0-0) |
| Corrosion resistance norm: | DIN 51802 |
| Water resistance: | 0-90 |
| Water resistance norm: | DIN 51807 |
| Water washout (%): | 0 |
| Suitable for: | bearing, open gears, wire ropes |
| Applicable with hardware: | Drum Pump, Grease Gun, Lubejet Eco |
| Suitable for Single Point Lubricators: | Yes |
| 4-ball weld load norm: | DIN 51350-4 |
| Colour: | Brown |
| Density at 20°C (g/cm3): | 1 |
| Dropping point (>°C): | 280 |
| Dropping point norm: | DIN 51801 |
| Grease code: | KPF2P-20 |
| Grease code norm: | DIN 51825 |
Safety & Compliance
| Dropping point norm | DIN 51801 |
|---|---|
| NLGI grade norm | ASTM D217 |
What is MicPol® technology?
MicPol® technology is Interflon's proprietary lubrication technology, specifically developed to reduce friction between moving parts to the lowest possible level.
Based on micronisation and polarisation, MicPol® technology uses ultra-fine additives that reach microscopic surface irregularities and adhere strongly to metal. Through alignment, netting and anchoring, these additives form a smooth, resilient tribofilm that provides long-lasting protection.
Key benefits of MicPol® technology:
- Consistently low friction across a wide range of speeds and load conditions
- Extended lubrication intervals and reduced lubricant consumption
- Reliable wear protection and longer component service life
- Enhanced protection against water, dust, dirt and corrosion
- Free from PFAS, PTFE, microplastics, silicones, nanomaterials and SVHCs