Skip image gallery
MicPol
NSF H1
Interflon Food Grease 1
Multi-purpose food grade grease
$102.99
- NSF H1 high EP and AW grease
- Enhanced pumpability characteristics
- Very high (shock-)load protection
- High adherence & water resistance
- Prolongs equipment life
Product number:
8526
|
Product unit:
jar
Documents
Product information "Food Grease 1"
- Suitable for Many Applications
- Reduces Friction and Wear Significantly Better than Conventional Lubrication Technology
- Excellent Pumpability Characteristics for Progressive Systems with Very Thin Tubing
- Resistant to Water Washout and Contamination
- Transparent, Allowing for Easy Visual Inspection
- Excellent Adhesive Properties and Protection Against Corrosion
- Suitable for All Automatic Lubrication System
- PFAS Free
High performance multi-purpose grease that does not bleed. Engineered for the (automatic) lubrication of machinery used in industrial and foodstuff environments. Fortified with MicPol® for providing outstanding equipment protection and extended grease life for problem-free operation. Highly resistant to water for providing functionality where extended grease life is required or process water rules out the use of conventional lubricants.
Application areas
For a variety of (central lubrication system) applications including the lubrication of slow to moderate speed bearings, guides, joints, spindles, shafts, slide ways and open gears. May be used in progressive automatic lubrication systems with tubing having an internal diameter of > 1 mm. Particularly suitable for the use in clean room and HACCP certified environments, especially where raw, fresh foods and beverages receive less than stringent sterilizing preparation.Instructions for use
For best results, parts should be cleaned or purged of the previous lubricant prior to use. May be applied either manually or by automatic greasing systems designed to pump an NLGI 1 grease.Specifications
| Base oil viscosity at 40°C norm: | ASTM D445 |
|---|---|
| Colour: | Beige |
| Copper corrosion: | 1b |
| Copper corrosion norm: | ASTM D4048 |
| Density at 20°C (g/cm3): | 0,94 |
| Dropping point norm: | DIN 51801 |
| Dry Lubricant: | No |
| Grease code: | KPF1N-20 |
| Grease code norm: | DIN 51825 |
| Micpol Technology: | Yes |
| NLGI grade norm: | ASTM D217 |
| NSF PFAS free: | Yes |
| NSF registration number: | 122684 |
| SKF Emcor distilled water: | 1-1 |
| SKF Emcor distilled water norm: | DIN 51802 |
| Shelf_life (years): | 4 |
| Suitable for: | bearing, open gears |
| Thickener: | Aluminium complex |
| Water resistance norm: | DIN 51807 |
| Water washout (%): | 1,50 |
| Applicable with hardware: | Drum Pump, G-Coupler, Grease Gun, Lubejet Eco, Single Point Lubricators |
| Min operating temperature (C): | -20 |
| Max operating temperature (C): | 150 |
| Base(oil) Viscosity (40C): | 400 |
| Food Safe (NSF): | H1 |
| Halal: | Yes |
| Kosher: | Yes |
| NLGI grade (consistency): | 1 |
| Dn-factor: | 250000 |
| Suitable for lubrication method: | manual, system |
| Water resistance: | 1-90 |
Safety & Compliance
| Copper corrosion norm | ASTM D4048 |
|---|---|
| Dropping point norm | DIN 51801 |
| NLGI grade norm | ASTM D217 |
What is MicPol® technology
MicPol® technology is Interflon’s patented technology that strengthens and improves the original properties of the lubricants. MicPol® is a combination of micronisation and polarization. Micronisation is a unique process where components of the lubricant are reduced in such a way that they can penetrate all pores and sub-pores of a surface to be lubricated. Polarization is the components that are charged during the production process. This ensures a unique adhesion to the surfaces to be lubricated. Advantages of MicPol® include;
- longer lasting lubrication (extends PM intervals)
- Runs at much lower friction than conventional or synthetic greases
- Dirt, sand and water repellent
- Lubricant lasts longer (less grease needed)
- Better resistance to high pressure and loads
Where do you ship?
We ship to all delivery addresses in the continental US through the web store. For Canadian shipping, please call us directly at 1-877-346-5823 or email us at [email protected].
The product or the specific container size I'm looking for is not on the web store - how can I buy it?
Some larger packaging sizes, and specific products may not be listed, but we should be able to help you source the items you need. Please contact us at 1-877-346-5823 or email us at [email protected]
Is there a minimum order quantity?
No, there is no minimum quantity.
I'm not sure which product is right for me. How can I get technical support or product recommendations?
Our lubrication experts can match you with the right lubricant for your application needs. You can call us at 1-877-346-5823 or email us at webstore-us@interflon.com.