Skip image gallery
MicPol
NSF H1
Interflon Food Grease 000
Semi-fluid grease
$0.00
- NSF H1 semi-fluid grease
- Reduces friction and wear
- Inhibits rust and corrosion
- Enhanced pumpability and mobility
- Automated grease delivery systems
Product number:
8421
|
Product unit:
drum
Documents
Product information "Food Grease 000"
- Exceptional, Long-Lasting Reduction of Friction And Wear
- Outstanding Shear Stability Reduces Gear Box Leakage
- Reduces Oil Temperature and Power Consumption
- Inhibits Rust and Corrosion
- Transparent, Enabling Easy Visual Inspection
- Helps Control Micro Pitting and Other Forms of Gear Wear
- Outstanding Shear Stability
- Reduces Gearbox Leakage
- PFAS-Free
Exceptionally long lasting, semi-fluid and easily pumpable
food grade lubricating grease for the use in central lubrication systems.
Engineered for a multitude of general machine applications and the lubrication
of gearboxes with splash lubrication. Fortified with MicPol® for increased
lubricity and extremely long-lasting protection against friction and
wear.
Listed by the NSF® (Class H-1) which gives this grease full acceptability for
use in all areas where incidental contact with food, beverages or drugs may
occur.
Application areas
Applications include the lubrication of industrial gearboxes running at slow to moderate speed industrial gearboxes and machine parts such as, bearings, chains and slides with automatic grease and oil delivery systems with tube diameters greater than 6 mm. Not for the use in progressive lubrication systems.Instructions for use
For best results, parts should be cleaned or purged of the previous lubricant prior to use. Drain the old oil from the gearbox as prescribed by the manufacturer. Interflon Food Grease 000 cannot be mixed with lithium greases. Do not use in central lubrication systems in which the grease will be pumped through tubes with an inside diameter smaller than 6 mm. When used in central lubrication systems remove any filters. For application in gearboxes please consult your Technical Advisor for the correct filling level.Specifications
| Base oil viscosity at 40°C norm: | ASTM D445 |
|---|---|
| Colour: | White |
| Copper corrosion: | 1b |
| Copper corrosion norm: | ASTM D4048 |
| Density at 20°C (g/cm3): | 0,93 |
| Dropping point norm: | DIN 51801 |
| Dry Lubricant: | No |
| Grease code: | KPF00N-25 |
| Grease code norm: | DIN 51825 |
| Micpol Technology: | Yes |
| NLGI grade norm: | ASTM D217 |
| NSF PFAS free: | Yes |
| NSF registration number: | 119638 |
| Shelf_life (years): | 4 |
| Suitable for: | bearing, gearboxes, open gears |
| Thickener: | Silica-aerogel |
| Applicable with hardware: | Drum Pump, Lubejet Eco, Single Point Lubricators |
| Min operating temperature (C): | -20 |
| Max operating temperature (C): | 120 |
| Base(oil) Viscosity (40C): | 220 |
| Food Safe (NSF): | H1 |
| Halal: | Yes |
| Kosher: | Yes |
| NLGI grade (consistency): | 0 |
| Dn-factor: | 250000 |
| Suitable for lubrication method: | manual, system |
Safety & Compliance
| Copper corrosion norm | ASTM D4048 |
|---|---|
| Dropping point norm | DIN 51801 |
| NLGI grade norm | ASTM D217 |
What is MicPol® technology
MicPol® technology is Interflon’s patented technology that strengthens and improves the original properties of the lubricants. MicPol® is a combination of micronisation and polarization. Micronisation is a unique process where components of the lubricant are reduced in such a way that they can penetrate all pores and sub-pores of a surface to be lubricated. Polarization is the components that are charged during the production process. This ensures a unique adhesion to the surfaces to be lubricated. Advantages of MicPol® include;
- Longer lasting lubrication (extends PM intervals)
- Runs at much lower friction than conventional or synthetic greases
- Dirt, sand and water repellent
- Lubricant lasts longer (less grease needed)
- Better resistance to high pressure and loads
Where do you ship?
We ship to all delivery addresses in the continental US through the web store. For Canadian shipping, please call us directly at 1-877-346-5823 or email us at [email protected].
The product or the specific container size I'm looking for is not on the web store - how can I buy it?
Some larger packaging sizes, and specific products may not be listed, but we should be able to help you source the items you need. Please contact us at 1-877-346-5823 or email us at [email protected]
Is there a minimum order quantity?
No, there is no minimum quantity
I'm not sure which product is right for me. How can I get technical support or product recommendations?
Our lubrication experts can match you with the right lubricant for your application needs. You can call us at 1-877-346-5823 or email us at [email protected].