Skip image gallery
MicPol
NSF H1
Interflon Fluor Grease 2
Chemical inert fluorinated grease with extended service life
$220.76
- Extreme condition specialty grease
- Very wide temp range -35 to +270'C
- Very low wear & frictioncoefficient
- Chemically inert & elastomer safe
- Significantly extends service life
Product number:
8830
|
Product unit:
tube
Documents
Product information "Fluor Grease 2"
- Extends service life and lubricating intervals up to 6 times
- Does not contain hydrocarbons and silicones
- Low coefficients of static and dynamic friction
- Exceptional low oil bleed and less wear
- High load carrying capacity
- Approved for use in fittings for oxygen gas to 60°C and a pressure of 30 bar (BAM Merkblatt M034-I)
- No stick-slip action even after long periods of inactivity
- Good metal adhesion, the grease does not run out of the greasing point.
- Low grease outgassing
- Can be applied on elastomers
Highly versatile, clean-room compatible NSF® (Class H-1)
fluorinated grease that you can depend on. Offers a unique combination of
exceptionally high- and low temperature performance, chemical inertness and
high load carrying capacity to satisfy your most difficult lubrication needs.
Formulated for ultimate performance in the most exacting grease applications.
Clearly significantly reduces wear to increase service life of critical
components that operate under extreme circumstances or are hard to re-lubricate
and need long life lubrication - with virtually no oil bleed.
For the (life-time) lubrication of bearings, chains, slides and other machine
parts used in (food-stuff) environments where temperatures range from -30°C to
+ 270°C and process water, steam, gas, oxygen, hydrocarbons, metal Working
fluids, acids, bases and other chemical substances rule out the use of
conventional greases.
Application areas
Critical environmental and foodstuffs applications of bearings, chains, slides and other components used in industrial environments at extreme temperatures. Also where process water, steam, gas, hydro-carbons, metal working fluids, acids, bases and other chemical substances rule out the use of conventional greases. Applications include the lubrication of steel, aluminum, copper and various alloys, ceramics, polymers and elastomer materials. Also suitable for fittings that come into contact with oxygen.Instructions for use
For best results, parts should be cleaned or purged of the previous lubricant prior to use.Specifications
| 4-ball weld load: | 700 kg |
|---|---|
| 4-ball weld load norm: | ASTM D2596 |
| Base oil viscosity at 40°C norm: | ASTM D445 |
| Colour: | White |
| Density at 20°C (g/cm3): | 2 |
| Dropping point norm: | DIN 51801 |
| Dry Lubricant: | No |
| Grease code: | KPF FK2U-30 |
| Grease code norm: | DIN 51825 |
| Maximum oxygen pressure (at 60°C, in bar): | 30 |
| Maximum oxygen pressure 60°C norm: | DIN ISO 21010:2004-07 |
| Micpol Technology: | Yes |
| NLGI grade norm: | ASTM D217 |
| NSF PFAS free: | Yes |
| NSF registration number: | 138255 |
| Shelf_life (years): | 4 |
| Suitable for: | bearing |
| Thickener: | PTFE |
| Applicable with hardware: | G-Coupler, Grease Gun, Lubejet Eco, Single Point Lubricators |
| Min operating temperature (C): | -30 |
| Max operating temperature (C): | 270 |
| Base(oil) Viscosity (40C): | 550 |
| Food Safe (NSF): | H1 |
| Halal: | Yes |
| Kosher: | Yes |
| NLGI grade (consistency): | 2 |
| Dn-factor: | 250000 |
| Suitable for lubrication method: | manual |
Safety & Compliance
| Dropping point norm | DIN 51801 |
|---|---|
| NLGI grade norm | ASTM D217 |
What is MicPol® technology
MicPol® technology is Interflon’s patented technology that strengthens and improves the original properties of the lubricants. MicPol® is a combination of micronisation and polarization. Micronisation is a unique process where components of the lubricant are reduced in such a way that they can penetrate all pores and sub-pores of a surface to be lubricated. Polarization is the components that are charged during the production process. This ensures a unique adhesion to the surfaces to be lubricated. Advantages of MicPol® include;
- Longer lasting lubrication (extends PM intervals)
- Runs at much lower friction than conventional or synthetic greases
- Dirt, sand and water repellent
- lubricant lasts longer (less grease needed)
- Better resistance to high pressure and loads
Where do you ship?
We ship to all delivery addresses in the continental US through the web store. For Canadian shipping, please call us directly at 1-877-346-5823 or email us at [email protected].
The product or the specific container size I'm looking for is not on the web store - how can I buy it?
Some larger packaging sizes, and specific products may not be listed, but we should be able to help you source the items you need. Please contact us at 1-877-346-5823 or email us at [email protected]
Is there a minimum order quantity?
No, there is no minimum quantity
I'm not sure which product is right for me. How can I get technical support or product recommendations?
Our lubrication experts can match you with the right lubricant for your application needs. You can call us at 1-877-346-5823 or email us at [email protected].