Skip image gallery
MicPol
NSF H1
Interflon Fin Grease (aerosol)
Transparent general purpose grease
Regular price:
$25.47
- Transparent general component spray
- Provides durable lubrication
- Expels water and dirt
- Good penetration properties
- Good wear protection
Product number:
9554
|
Product unit:
aerosol
Product information "Fin Grease (aerosol)"
- Multipurpose Grease
- Transparent Grease, Does Not Stain
- Provides Durable Lubrication
- Expels Water and Dirt
- Good Penetration Properties
- Resistant Against Steam and Water
- Reduces Costs Because of Lower Lubrication Intervals
- Aerosol Can Be Used in an Upside Down (Vertical) Position
- PFAS Free
Non-staining, transparent multipurpose grease for superior general lubrication purposes. Formulated to create a tough durable film that prevents metal-to-metal contact and seals out water and contaminants to lubricate even under the most demanding conditions. For a significant reduction of friction, wear and maintenance costs. H1 food grade for use in the food, beverage and pharmaceutical industry. Protects against water and contaminants, steam resistant, transparent and odorless.
Application areas
For lubrication of machine parts, like bearings, guides, gears, axles, crown gears, spindles, cables, hinges, shafts, toothed belts, locking pins, valves and many other parts. Especially suited for lubrication at high loads.
Instructions for use
Shake well before use. Use aerosol from a vertical (upright or upside down) position only. Parts should be cleaned first with a solvent or alkaline cleaning agent. Apply thinly
Specifications
| Micpol Technology: | Yes |
|---|---|
| Base(oil) viscosity (40°C): | 400 |
| Thickener: | Inorganic |
| Base oil viscosity at 40°C norm: | ASTM D445 |
| NLGI grade (consistency): | 2 |
| NLGI grade norm: | ASTM D217 |
| Max operating temperature (°C): | 150 |
| Min operating temperature (°C): | -20 |
| NSF certified: | H1 |
| Halal: | Yes |
| Kosher: | Yes |
| Vegan: | Yes |
| Shelf life (years): | 6 |
| PFAS-free: | Yes |
| MOAH-free: | Yes |
| Suitable for lubrication method: | manual |
| Dn-factor: | 250000 |
| Corrosion resistance: | Good (Emcor distilled 2-2) |
| Corrosion resistance norm: | DIN 51802 |
| Water resistance: | 1-90 |
| Water resistance norm: | DIN 51807 |
| Water washout (%): | 1.5 |
| Copper corrosion: | 1b |
| Suitable for: | bearing, chains, open gears, wire ropes |
| Colour: | White |
| Copper corrosion norm: | ASTM D4048 |
| Density at 20°C (g/cm3): | 0.67 |
| Dropping point norm: | DIN 51801 |
| Grease code: | KPF2N-20 |
| Grease code norm: | DIN 51825 |
| NSF registration number: | 123184 |
Safety & Compliance
| Copper corrosion norm | ASTM D4048 |
|---|---|
| Dropping point norm | DIN 51801 |
| NLGI grade norm | ASTM D217 |
What is MicPol® technology?
MicPol® technology is Interflon's proprietary lubrication technology, specifically developed to reduce friction between moving parts to the lowest possible level.
Based on micronisation and polarisation, MicPol® technology uses ultra-fine additives that reach microscopic surface irregularities and adhere strongly to metal. Through alignment, netting and anchoring, these additives form a smooth, resilient tribofilm that provides long-lasting protection.
Key benefits of MicPol® technology:
- Consistently low friction across a wide range of speeds and load conditions
- Extended lubrication intervals and reduced lubricant consumption
- Reliable wear protection and longer component service life
- Enhanced protection against water, dust, dirt and corrosion
- Free from PFAS, PTFE, microplastics, silicones, nanomaterials and SVHCs
What is Interflon Fin Grease (aerosol) used for?
Fin Grease (aerosol) is a transparent, multipurpose grease that is used for the lubrication of various machine parts such as bearings, guides, gears, axles, crown gears, spindles, cables, hinges, shafts, toothed belts, locking pins, and valves. It is especially suited for lubrication under high loads and is applicable in general industry, the food industry, and many other sectors.
What are the advantages of using Fin Grease (aerosol)?
- Transparent grease: It does not stain.
- Durable lubrication: Provides long-lasting lubrication.
- Water and dirt repellent: Expels water and dirt effectively.
- Good penetration properties: Ensures the lubricant reaches critical areas.
- Resistance to steam and water: Maintains performance in challenging environments.
- Cost reduction: Leads to lower lubrication intervals and protects machine parts from wear, reducing overall costs.
- PFAS-free: Environmentally conscious formulation.
- Versatile application: The aerosol can be used in an upside-down (vertical) position for convenience.
What kind of protection does Fin Grease offer?
Fin Grease protects against water and contaminants, is steam resistant, and provides significant reduction in friction and wear, extending the service life of machine parts.
How do I apply Fin Grease (aerosol)?
- Shake well: Shake the aerosol can thoroughly before use.
- Clean parts: Parts should be cleaned first with a suitable solvent or alkaline cleaning agent.
- Apply thinly: Spray a thin layer onto the parts you wish to lubricate.
- Positioning: The aerosol can be used from a vertical position only (upright or upside down).
Is Fin Grease (Aerosol) suitable for use in the food industry?
Yes, Fin Grease (aerosol) is listed by the NSF for use in applications with incidental food contact (NSF H1 registered).
What is the operating temperature range of Fin Grease (aerosol)?
Fin Grease is suitable for temperatures from -4°F to 302°F.